Open network: guest WiFi and onboardingGuest Access
Public sector guest WiFi: councils, libraries and civic buildings
Decide which network each council, library and civic space should run: an open network with a captive portal, xPSK per group or 802.1X with EAP-TLS. You can then brief service leads, set the right access point settings on the hardware you own and pilot the change at one branch this quarter.
15 min read

Watch the explainer
Use an open network with a captive portal (a sign-in page before access) when the public visit on personal devices. Use xPSK, a separate WiFi key per group or device, when a known group returns daily. Use IEEE 802.1X with EAP-TLS certificates when visiting staff carry managed laptops. For most council and library estates, open is the default.
Which network should a council or library run for public WiFi?
Public sector guest WiFi follows one rule of thumb. Put anonymous visitors on an open network, known groups on xPSK, and managed devices on a secure network. Identity then sets the VLAN, a separate logical network on the same access points. A library visitor, a tenant charity and a visiting health worker never share a segment with council systems.
These terms carry the rest of this guide:
- Captive portal: the page a device sees after joining an open SSID and before it reaches the internet.
- xPSK: the vendor features that give each group or device its own pre-shared key, such as iPSK on Cisco Meraki and DPSK on Ruckus.
- IEEE 802.1X: the standard for port-based network access control.
- EAP-TLS: the 802.1X method that proves identity with a certificate instead of a password.
All three networks ask a RADIUS server for a decision. RADIUS is the protocol access points use to check whether a device may join, defined in RFC 2865. Its reply can name a VLAN using the tunnel attributes in RFC 3580. That is how identity, not the SSID name, decides where traffic lands. Purple calls this approach Identity-Based Networks.
Four situations bend the rule:
- A meeting with a known attendee list suits pre-registration.
- A tenant organisation that returns daily suits xPSK.
- Partner agency staff on managed laptops suit 802.1X.
- A self-service kiosk that cannot render a portal suits a per-device key.
The sections below show how to spot each one.
{"tone":"note","title":"Scope","text":"This guide covers networks for the public, tenants and visiting partners in council buildings. Staff WiFi for your own employees is a separate decision tied to your own identity provider."}
How do you choose the right network in under a minute?
Run each building type through these four questions. Most branch libraries, council receptions, museums and leisure centres reach the open network at the first or second question.
{"title":"Which network fits this public sector space?","start":"q1","nodes":[{"id":"q1","question":"Are most visitors members of the public on personal devices?","help":"Libraries, receptions, museums and leisure centres usually answer yes.","options":[{"label":"Yes","to":"q2"},{"label":"No","to":"q3"}]},{"id":"q2","question":"Do you know who is coming before they arrive?","help":"A booked meeting, consultation or conference with an attendee list.","options":[{"label":"Yes","to":"o2"},{"label":"No","to":"o1"}]},{"id":"q3","question":"Does another organisation manage the devices through its identity provider or MDM?","help":"Visiting partner agency staff on managed laptops.","options":[{"label":"Yes","to":"o4"},{"label":"No","to":"q4"}]},{"id":"q4","question":"Does the same group return most days for weeks or months?","help":"Tenant charities, adult learning classes, residents in temporary accommodation, kiosks.","options":[{"label":"Yes","to":"o3"},{"label":"No","to":"o1"}]},{"id":"o1","outcome":"Open network with a captive portal","detail":"One SSID, terms acceptance, isolated guest VLAN and Shield for DNS filtering.","link":"[Open network overview](pillar:)"},{"id":"o2","outcome":"Open network with pre-registration","detail":"Attendees register before arrival and connect without a form at the door.","link":"[Visitor WiFi pre-registration](guide:visitor-wifi-pre-registration)"},{"id":"o3","outcome":"xPSK, one key per group, resident or device","detail":"Each key maps to its own VLAN and is revoked when the lease, course or stay ends."},{"id":"o4","outcome":"802.1X with EAP-TLS, or Passpoint","detail":"Partner certificates or profiles authenticate against cloud RADIUS. No captive portal; RADIUS sets the VLAN."}]}
If a building answers differently on different floors, run the tree per space. A town hall can need all four outcomes under one roof, on the same access points.
Which option fits each civic building?
The table maps the spaces a local authority usually runs to a recommendation and the condition behind it. Use it to brief your service leads before you change any SSID.
{"caption":"Council guest WiFi: scenario, recommendation and reason","asOf":"2026-06-10","columns":[{"key":"scenario","label":"Scenario"},{"key":"rec","label":"Recommendation","highlight":true},{"key":"why","label":"Why"}],"rows":[["Branch library, walk-in visitors","Open network, click-through captive portal","Anonymous, short stays; terms acceptance is evidence for your acceptable use policy"],["Central library with study spaces","Open network, email sign-in","Longer stays; an email gives you a contact for service notices with conscious-choice opt-ins"],["Council reception","Open network, click-through","Visits under an hour; collect nothing beyond terms acceptance"],["Museum, gallery or leisure centre","Open network, email sign-in","Repeat visitors; any marketing consent sits in Engage"],["Town hall public consultation","Open network with pre-registration","Known attendee list; everyone arrives in the same 15 minutes"],["Civic hall hired for a conference","Open network with event code","The organiser controls access for the booking window"],["Tenant charity on a lease","xPSK, one key per organisation","Known group, daily return; own VLAN, ends with the lease"],["Adult learning class or homework club","xPSK, one key per class","Fixed roster for a term; revoke one key at term end"],["Council temporary accommodation","xPSK, one key per resident","Private segment per household; revoke at move-out"],["Partner agency staff on managed laptops","802.1X with EAP-TLS, or Passpoint","Devices already hold certificates or profiles; no portal"],["Self-service kiosks and signage","xPSK, one key per device","Cannot render a captive portal; key sets a device VLAN"]],"footnote":"Recommendations assume access points from the vendors named in this guide, running the same Purple platform for all three networks.","download":{"filename":"council-guest-wifi-scenarios.csv"}}
The pattern holds across the table. Anonymity and short stays point to open. A known group with a defined end date points to xPSK. A device someone else already manages points to 802.1X.
How does an open network work in a library or civic centre?
The open network is the lane most library WiFi and council guest WiFi should sit in. It carries the most visitors with the least administration.
What happens when a visitor connects
{"kind":"flow","direction":"lr","caption":"How a visitor reaches the internet on a council open network","alt":"A visitor joins the open SSID, completes the captive portal, is authorised by RADIUS and lands on an isolated guest VLAN with DNS filtering.","nodes":[{"id":"a","label":"Visitor joins open SSID","sub":"No WiFi password; OWE encrypts where supported","tone":"neutral"},{"id":"b","label":"Captive portal loads","sub":"Walled garden allows the portal before access","tone":"brand"},{"id":"c","label":"Visitor accepts terms","sub":"Click-through, email or pre-registration code","tone":"brand"},{"id":"d","label":"RADIUS authorises session","sub":"Returns the guest VLAN and session limits","tone":"brand"},{"id":"e","label":"Isolated guest VLAN","sub":"Client isolation on; no route to council systems","tone":"success"},{"id":"f","label":"Internet via Shield","sub":"DNS filtering applies your library policy","tone":"success"}],"edges":[{"from":"a","to":"b","style":"solid"},{"from":"b","to":"c","style":"solid"},{"from":"c","to":"d","style":"solid"},{"from":"d","to":"e","style":"solid"},{"from":"e","to":"f","style":"solid"}]}
The visitor joins the SSID and the access point holds traffic until the captive portal completes. A walled garden, a short allow-list of addresses reachable before sign-in, lets the portal page load. After the visitor accepts your terms, Purple's RADIUS service authorises the session. It also returns limits such as session length.
Where your access points advertise the portal through the Captive Portal API in RFC 8908 and the DHCP option in RFC 8910, devices can find the portal directly. Where both sides support OWE (Opportunistic Wireless Encryption, RFC 8110), the open network encrypts each session without a password.
Client isolation on the guest VLAN stops one visitor's device from reaching another's. Shield adds DNS filtering on the same VLAN, so your filtering policy applies at every branch.
Settings on the access points you already own
Purple runs as a cloud overlay, so the open network needs no new hardware. It is hardware-agnostic across Cisco Meraki, HPE Aruba, Ruckus, Juniper Mist, Ubiquiti UniFi, Cambium, Extreme and Fortinet. On the five platforms most councils run, you change one SSID setting to point at an external captive portal:
- Cisco Meraki: the splash page setting on the SSID in Meraki Dashboard.
- HPE Aruba: an external captive portal profile in Aruba Central.
- Ruckus: a Hotspot (WISPr) WLAN in SmartZone or RUCKUS One.
- Juniper Mist: the guest portal, set to forward to an external portal, in the Mist cloud console.
- Ubiquiti UniFi: the hotspot portal with an external portal server in the UniFi Network application.
Purple's support article for your vendor gives the exact values, including the RADIUS server and walled garden entries. On Purple's own data, portal setup takes under 15 minutes. The open network product page covers the captive portal and onboarding options in full.
Worked scenario: a county library service on Cisco Meraki
Situation. A county library service ran 20 branches, each with a shared WiFi password printed at the desk. Branch staff changed passwords locally and on different schedules. The service had no record of who had accepted its acceptable use policy.
What was done. The network team replaced the 20 passwords with one open SSID, configured once in Meraki Dashboard. The splash page pointed at a Purple click-through captive portal. Traffic landed on an isolated guest VLAN with Shield DNS filtering.
Outcome. Shared passwords to rotate fell from 20 to zero. Every session now carries a timestamped terms acceptance, which serves as evidence for the acceptable use policy. One portal template replaced 20 sets of desk signage, and desk staff stopped handing out passwords.
{"tone":"warning","title":"The risk that bites","text":"A shared password at the desk gives you no record of who accepted your terms and no way to remove one person. Changing it means new signage at every branch and a queue at the desk."}
When do xPSK and secure networks earn their place?
The open network covers most visitors. Two other lanes earn their place only when a specific condition holds.
xPSK for tenants, classes and residents
xPSK suits a known group that returns regularly but has no managed devices. Each organisation, class or resident gets its own key. Vendors name the feature differently. It is iPSK on Cisco Meraki, MPSK on HPE Aruba and DPSK on Ruckus. Juniper Mist and Ubiquiti UniFi offer equivalent multi-key features, often called PPSK (private pre-shared key).
When a device joins with a key, RADIUS identifies the key and returns that group's VLAN. The key is the identity, so identity still sets the VLAN. Revoking a tenant means revoking one key, not changing a password for the whole building.
xPSK costs more to run than an open network, because someone must issue and revoke keys. Tie that task to a joiners, movers and leavers process you already manage. Lease starts, term dates and housing move-ins all work.
Worked scenario: a civic centre with tenant charities on Ruckus
Situation. A civic centre housed a register office, a public reception and three voluntary-sector tenants on one Ruckus SmartZone controller. Tenants used the public guest network. Their printers and laptops sat on the same segment as walk-in visitors.
What was done. The team kept the open network for the public and added one DPSK per tenant organisation. Each key returned its own VLAN from Purple's cloud RADIUS. The leasing team took ownership of key issue and revocation.
Outcome. Three tenants moved off the public VLAN onto three private segments. When one tenant left, the team revoked a single key in one step. The other two tenants saw no change.
802.1X, Passpoint and OpenRoaming for partner staff
Some visitors arrive on devices another organisation manages: health visitors, police officers, auditors from a neighbouring authority. They should not meet a captive portal at all. A secure network using 802.1X with EAP-TLS checks each device certificate against cloud RADIUS. WPA3-Enterprise then encrypts the session.
Passpoint, also known as Hotspot 2.0, lets a device find and join a network automatically using a profile it already holds. OpenRoaming is a federation built on Passpoint. It lets people from member organisations connect without a sign-in page.
Use this lane when two conditions hold. First, the partner manages the devices. Second, the partner can issue certificates or profiles through its MDM and identity provider, such as Microsoft Entra ID, Okta or Google Workspace. If either condition fails, put those visitors on the open network.
{"tone":"proof","title":"Proven at public-facing scale","text":"Vancouver International Airport and Kinetic Melbourne Airport run on Purple. Purple onboards about 2 million people a day across 80,000+ venues in 90 countries (Purple data)."}
What does each option cost to run?
Cost to run is mostly staff time, not hardware. All three networks run on the access points you own. The variable is how many identities someone must issue, renew and revoke.
{"caption":"What each option costs to run on a public sector estate","asOf":"2026-06-10","columns":[{"key":"option","label":"Option"},{"key":"setup","label":"Setup effort"},{"key":"ongoing","label":"Ongoing effort"},{"key":"helpdesk","label":"Desk and helpdesk load"},{"key":"hardware","label":"Hardware change"}],"rows":[["Open network with captive portal","Portal template in under 15 minutes; one SSID setting per controller","Update terms and branding once for every site","Low: no password to hand out","None"],["Open network with pre-registration","Registration page linked to the event booking","One attendee list per event","Low: attendees arrive already registered","None"],["xPSK per group or resident","One key and one VLAN per group","Issue at joiner, revoke at leaver","Medium: lost keys are reissued","None; uses iPSK, MPSK, DPSK or PPSK on the controller"],["802.1X with EAP-TLS, or Passpoint","Cloud RADIUS trust for partner certificates or profiles","Certificate renewal sits with the partner's MDM","Low once devices hold a certificate","None; WPA3-Enterprise or WPA2-Enterprise SSID"],["Shared password at the desk (status quo)","Minutes per branch","Manual rotation and reprinted signage at every site","High: staff handle every password request","None"]],"footnote":"Effort describes staff time. The under-15-minute portal setup is Purple's own data.","download":{"filename":"public-sector-wifi-cost-to-run.csv"}}
Read the table from the bottom up. The shared password looks cheapest to set up. It is the most expensive to run, because every rotation touches every branch. An open network has the lowest ongoing effort per visitor, because nothing is issued.
xPSK effort scales with the number of groups, not the number of visitors. Twelve tenants mean 12 keys, however many devices each tenant brings. 802.1X effort sits mostly with the partner who manages the devices. Your task is to trust their certificates once.
What changes the answer for your estate?
The rule of thumb holds for most local authority guest WiFi. Six conditions can move a space from one lane to another, or change how you run the open network.
Your filtering policy
Libraries usually filter public internet access. If your policy requires filtering, apply it on the guest VLAN with Shield rather than on each branch firewall. One policy then covers every branch and every device on the open network. Filtering runs after sign-in, so the captive portal and walled garden stay reachable.
Data protection and retention
Under UK GDPR, the captive portal is where you state your lawful basis and collect only what you need. Click-through suits a reception where you need nothing beyond acceptance. Email sign-in suits a central library that sends service notices, with conscious-choice opt-ins for anything further. Guest marketing sits in Engage, separate from access.
Set a retention period for session records and document it. Those records become evidence for your data protection impact assessment. The ICO's guidance for organisations is the primary reference.
Events and pre-booked meetings
Situation. A town hall hosted a planning consultation for 400 registered attendees. Previous events relied on a password read out from the stage, and the evening started with a queue of questions.
What was done. The team kept the open network and added pre-registration to the booking form. Attendees received access details before arrival and connected without a form at the door.
Outcome. The registration list became the access record for the evening, with zero forms completed on arrival. The same approach scales to civic halls hired for conferences, covered in conference centre WiFi portals. For the pre-arrival flow itself, see visitor WiFi pre-registration.
Devices that cannot show a portal
Self-service kiosks, digital signage and some sensors cannot render a captive portal. Give each one an xPSK key mapped to a device VLAN. Keep them off the guest VLAN, so a visitor never shares a segment with council-owned equipment.
Accessibility of the sign-in page
Treat the captive portal as a public-facing page. Test it against WCAG 2.2 level AA, the level UK public sector websites work to. Check contrast, keyboard access and plain-language terms before launch.
Estate size
A council with 50 or more sites needs one portal template applied estate-wide, not a portal per building. Centralised consoles such as Meraki Dashboard and the Juniper Mist cloud console apply SSID changes across many sites at once. The multi-site pattern matches QSR guest WiFi, where one sign-in serves thousands of locations.
What should you deploy by default?
The default for a council, library service or civic estate is Purple's open network with a captive portal on every public SSID. Add xPSK or 802.1X only where a condition in this guide applies. All three run on the same Purple platform and the same access points.
{"title":"Which network for each public sector space","options":[{"name":"Open network with Purple captive portal","fitsWhen":["Public visitors on personal devices","Stays from minutes to a day","You need terms acceptance as evidence for your acceptable use policy"],"notWhen":["The same group returns daily for months","The device cannot render a portal"]},{"name":"xPSK per group, resident or device","fitsWhen":["Tenant organisations on a lease","Residents in temporary accommodation","Classes with a fixed roster","Kiosks and signage"],"notWhen":["Anonymous walk-in visitors"]},{"name":"802.1X with EAP-TLS, or Passpoint","fitsWhen":["Partner agency staff on managed devices","Partners that issue certificates or profiles"],"notWhen":["Unmanaged personal devices"]}],"recommendation":"Deploy Purple's open network with a captive portal on every public SSID first. Then add xPSK and 802.1X on the same Purple platform where a known group or a managed device meets the conditions above."}
{"tone":"tip","title":"The default","text":"Run Purple's open network with a click-through captive portal on an isolated guest VLAN, with Shield DNS filtering, in every public building. Add xPSK or 802.1X only for spaces that meet a named condition."}
Your first action this quarter: list every public SSID and shared password across your estate. Run the decision tree for each space. Then pick one branch library and point its SSID at a Purple captive portal in your vendor's console. Compare desk password requests before and after.
For the wider picture, read Purple's guest WiFi guide and the open network overview.
Frequently asked questions
What does public sector guest WiFi cost to run?
The cost that varies between options is staff time, because all three networks run on the access points you already own. An open network with a captive portal has the lowest ongoing effort: no passwords to issue and one set of terms to maintain. xPSK adds key issue and revocation per group. 802.1X adds certificate management, which usually sits with the partner. Licence pricing comes from your Purple quote.
Does Purple work with the access points we already own?
Yes. Purple is hardware-agnostic and runs as a cloud overlay on Cisco Meraki, HPE Aruba, Ruckus, Juniper Mist, Ubiquiti UniFi, Cambium, Extreme and Fortinet. You change the captive portal or RADIUS setting on an existing SSID in your vendor's console, such as Meraki Dashboard or the UniFi Network application. No new hardware is needed. Purple's support article for each vendor lists the exact values.
How do we migrate from a shared password or an existing captive portal?
Run the new open SSID alongside the old network at one branch, then switch the rest site by site. Point the new SSID at a Purple captive portal, then confirm the walled garden, guest VLAN and filtering. Retire the old password once visitors have moved across. Update desk signage at each branch on the day you switch.
Can Purple give us evidence for GDPR and our acceptable use policy?
Yes. Purple records a timestamped terms acceptance for each session, which you can present as evidence for your acceptable use policy and data protection records. Purple holds ISO 27001 and Cyber Essentials certification, which supports your supplier due diligence. You still set the lawful basis, the fields the portal collects and the retention period. Document all three in your data protection impact assessment.
Should a library use an open network or xPSK?
Use an open network for library visitors and keep xPSK for groups. Walk-in visitors are anonymous and stay briefly, so per-person keys would mean the desk issues credentials all day. xPSK fits a homework club, an adult learning class or a tenant on a lease. There, one key covers a known group and you revoke it when the term or lease ends.
How long does a rollout take across a multi-site council estate?
The portal takes under 15 minutes to set up, on Purple's own data, and one template covers every site. Most of the time goes into the network side: changing the SSID setting on each controller, confirming the guest VLAN and testing filtering. Pilot one branch first. Then roll out by controller or site group, using templates in consoles such as Meraki Dashboard.
How do we filter content on library WiFi?
Apply DNS filtering on the guest VLAN with Shield, Purple's security add-on, rather than configuring each branch firewall. One policy then covers every branch and every device on the open network. Filtering applies after sign-in, so the captive portal stays reachable. Agree the filtering categories with your library service lead. Record the policy alongside your acceptable use terms.
Can visiting partner staff connect without a captive portal?
Yes, when their devices are managed. Configure a secure SSID using 802.1X with EAP-TLS, or Passpoint, and trust the partner's certificates or profiles in Purple's cloud RADIUS. Their laptops join automatically and land on a partner VLAN. Staff on unmanaged personal phones should use the open network instead, because they hold no certificate or profile to present.
Frequently asked questions
What does public sector guest WiFi cost to run?
The cost that varies between options is staff time, because all three networks run on the access points you already own. An open network with a captive portal has the lowest ongoing effort: no passwords to issue and one set of terms to maintain. xPSK adds key issue and revocation per group. 802.1X adds certificate management, which usually sits with the partner. Licence pricing comes from your Purple quote.
Does Purple work with the access points we already own?
Yes. Purple is hardware-agnostic and runs as a cloud overlay on Cisco Meraki, HPE Aruba, Ruckus, Juniper Mist, Ubiquiti UniFi, Cambium, Extreme and Fortinet. You change the captive portal or RADIUS setting on an existing SSID in your vendor's console, such as Meraki Dashboard or the UniFi Network application. No new hardware is needed. Purple's support article for each vendor lists the exact values.
How do we migrate from a shared password or an existing captive portal?
Run the new open SSID alongside the old network at one branch, then switch the rest site by site. Point the new SSID at a Purple captive portal, then confirm the walled garden, guest VLAN and filtering. Retire the old password once visitors have moved across. Update desk signage at each branch on the day you switch.
Can Purple give us evidence for GDPR and our acceptable use policy?
Yes. Purple records a timestamped terms acceptance for each session, which you can present as evidence for your acceptable use policy and data protection records. Purple holds ISO 27001 and Cyber Essentials certification, which supports your supplier due diligence. You still set the lawful basis, the fields the portal collects and the retention period. Document all three in your data protection impact assessment.
Should a library use an open network or xPSK?
Use an open network for library visitors and keep xPSK for groups. Walk-in visitors are anonymous and stay briefly, so per-person keys would mean the desk issues credentials all day. xPSK fits a homework club, an adult learning class or a tenant on a lease. There, one key covers a known group and you revoke it when the term or lease ends.
How long does a rollout take across a multi-site council estate?
The portal takes under 15 minutes to set up, on Purple's own data, and one template covers every site. Most of the time goes into the network side: changing the SSID setting on each controller, confirming the guest VLAN and testing filtering. Pilot one branch first. Then roll out by controller or site group, using templates in consoles such as Meraki Dashboard.
How do we filter content on library WiFi?
Apply DNS filtering on the guest VLAN with Shield, Purple's security add-on, rather than configuring each branch firewall. One policy then covers every branch and every device on the open network. Filtering applies after sign-in, so the captive portal stays reachable. Agree the filtering categories with your library service lead. Record the policy alongside your acceptable use terms.
Can visiting partner staff connect without a captive portal?
Yes, when their devices are managed. Configure a secure SSID using 802.1X with EAP-TLS, or Passpoint, and trust the partner's certificates or profiles in Purple's cloud RADIUS. Their laptops join automatically and land on a partner VLAN. Staff on unmanaged personal phones should use the open network instead, because they hold no certificate or profile to present.