Skip to content
Access

MAC authentication for the devices nothing else fits

Register a printer, camera or sensor once. Cloud RADIUS checks its address at every site, puts it on its VLAN and logs it.

Illustration

The problem

Some devices cannot take a key or a certificate

  • No screen, no keyboard

    Nothing to type a key into

    Printers, cameras, medical and building kit often cannot hold a certificate or take a WiFi key (xPSK). They end up on whatever is left open.

  • A list per controller

    MAC lists drift site by site

    Each controller and switch keeps its own allow list. Nobody keeps them in step, so old kit stays allowed and new kit is refused.

  • Live ports

    Wired ports check nothing

    A camera or door controller on a switch port joins the same flat network as everything else, and nothing records that it did.

The solution

One cloud register, checked at every site

The access point or switch never decides. It passes the device's MAC address to Purple cloud RADIUS, which admits it, returns its VLAN and logs it.

  • Certificates (EAP-TLS)The strongest method. For laptops, phones and tablets your MDM manages.
  • WiFi keys (xPSK)Strong. A key per device or person, for kit that can type a passphrase.
  • MAC authenticationBasic. For printers, cameras, medical and building kit with no screen or keyboard.
  • Kept apartMAC-authenticated devices sit on their own restricted VLAN, so a copied address reaches little.
Illustration

How it works

Register, connect, move, disable, remove

Every change happens in the console, once, for every site.

  1. Register the device

    Add its MAC address, a name, a type and its VLAN, one by one or by CSV. Rows that fail come back with the reason.

  2. It connects at any site

    A registered, enabled device is admitted wherever its network points at Purple. Anything else is refused, and every attempt is logged.

  3. Move it to another VLAN

    Change its VLAN in the console. RADIUS returns the new VLAN with standard attributes at the next login.

  4. Disable or remove it

    A disabled device is refused at its next attempt and keeps its record. Delete the record when the device leaves the estate.

WiFi and switch ports

One register for WiFi and for switch ports

The same device record works over the air and on a wired port.

  • On WiFi

    Cisco Meraki, Cisco Catalyst, HPE Aruba, Ruckus, Juniper Mist, Ubiquiti UniFi, Fortinet and Purple Hub. RadSec where the hardware supports it, RADIUS over UDP 1812 and 1813 elsewhere.

  • On switch ports

    A camera or door controller plugged into a live port is checked against the same register. Unknown kit is refused at the port.

Proof

The same cloud RADIUS behind every Purple network

MAC authentication runs on the largest cloud RADIUS in the world, with two endpoints per region in the UK, EU and US.

500M
logins a year
99.9%
cloud RADIUS uptime SLA, in your contract
80,000+
venues run on Purple, in 90 countries
  • ISO 27001 certified
  • Cyber Essentials Plus
  • Zero data breaches since 2012

Trusted by

  • Chase
  • McDonald's
  • Whitbread
  • Manchester Airports Group
  • Harrods
  • University of Sheffield
  • Walmart Canada
  • AGS Airports

FAQ

Common questions

Is MAC authentication secure?

It is the basic method. A MAC address can be copied, so it proves less than a certificate or a WiFi key. Use it only for devices that cannot take either, and keep them on their own restricted VLAN.

Should we use it for phones and laptops?

No. Phones and laptops randomise their addresses, and they can hold a certificate or a WiFi key, which are both stronger. Managed devices take certificates from your MDM.

What do we check before registering a device?

Turn off randomised MAC addresses on the device, and register the device's own address, not the access point's. Colons, hyphens or no separators all work.

Can we bring our existing MAC lists?

Yes. Put each per-site or per-controller list in the CSV template and upload it. Valid rows register at once, and any failed rows come back with the reason.

Does it work on wired switch ports?

Yes, today. The same register checks devices on switch ports, returns their VLAN and logs every attempt, as it does on WiFi.

Does disabling a device disconnect it immediately?

No. A disabled device is refused at its next connection attempt. The session it already has is not cut.

Which access points does it run on?

Cisco Meraki, HPE Aruba, Ruckus, Juniper Mist, Ubiquiti UniFi, Cambium, Extreme and Fortinet, as a cloud overlay. One register covers every site, with no per-site or per-controller list.

Get every headless device on its own VLAN

Tell us what plugs in at a typical site. We sort each device into certificates, WiFi keys or MAC authentication, with its VLAN. All in a 45-minute design session.

Book a demo

Tell us about your network

Led by a Purple network engineer. No slides.